Glass Pool Fence Systems
We have 5 Glass systems that can be applied for Glass Pool Fencing
Concrete core fix system
Timber deck mount system
Side fixed spigot system
Concrete channel fix system
In ground fix system
HOW IT ALL WORKS
Concrete Core Fix System
Core 120mm deep holes using industrial diamond core drill
Fix spigots onto glass
Insert spigots into holes and plumb via x,y and z axis with string line
Fix using sika non shrink cement construction grout
Maximum strength allowing spans of up to 2 metre wide panels
Timber Deck Plate Fix System
Reinforcement of underneath deck with timber between joists
Fix spigots onto deck with bolts
Adjust spigots with string line so perfectly plum on x and y axis
Insert glass
Spans of up to 1600mm wide panels available on deck
Apply rigi-clamps for maximum strength allowing spans of up
to 2000mm wide panels – see below
Rigi-Clamp
Rigi Clamps allow us to maintain a dead straight glass line on a timber deck.
Side Fix Spigot System
Reinforcement of side of deck with timber between joints
Fix spigots onto side deck with bolts
Adjust spigots with string line so perfectly plum on x, y and z axis
Insert glass
Spans of up to 1600mm wide panels available on deck
Apply rigi clamps for maximum strength and rigidity
Concrete Channel Fix System
Concrete grind and chase out 120mm x 120mm channel or insert aluminium u channel if doing a fresh concrete pour
Tile up to glass with 40mm gap (very important)
Fix glass in position with braces and glazing packers making sure x, y and z axis are perfect (you only get one chance)
Grout off glass with 24 hour curing 50mpa cement based non shrink grout, while haunching to eliminate bubbles (if bubbles remain job will fail)
Spans of up to 2000mm wide panels
Silicon or grout tile up to glass
In Ground Fix System
Dig 400mm deep x 400mm wide holes
Construct frame from steel rio bar and mesh
Pour holes with concrete allowing 30-40mm below grass level
Core 120mm deep holes using industrial diamond core drill
Spigots inserted into holes and fixed using sika non shrink cementitous construction grout
Maximum strength allowing spans of up to 2 metre wide panels
Fill in area with topsoil and grass
Glass Quality
Modular Glass have developed a reputation for supplying and installing the highest quality toughened glass.
Double Edge polishing Machines
Perfect polish and blemish free edge
Horizontal double edge polishing machines give the finest edge
Quality control personnel check each sheet of glass
sophisticated water filtration system ensures clean water used during polishing
Modular Glass’ 10mm & 12mm Glass.
All our Glass is tested and certified as complying with the requirements of Australian and New Zealand standard 2208:1996 – Safety Glazing Material
Detailed Quality Control
At each stage of production (cutting, polishing, drilling, tempering and packing) dedicated quality control personnel inspect each sheet of glass. Glass identified as not conforming to the highest quality standards is set aside.
